ENGINEERING INSIGHTS

Better pump decisions begin with better duty data.

Answer-first field guides for engineers, buyers and project teams comparing real operating requirements, materials, controls and maintenance risks.

ARTICLE ARCHIVE

Every technical guide remains available.

Browse all articles by publication date. Older guides continue on the following pages.

TECHNICAL GUIDE · 14 AUG 2026

What information is needed to confirm fluoroplastic magnetic-pump compatibility?

What chemical, concentration, temperature, solids and cleaning data are needed before confirming a fluoroplastic magnetic drive pump.

Read technical guide →
TECHNICAL GUIDE · 14 AUG 2026

Diaphragm, ball and seat materials: why every AODD wetted component matters

Why AODD diaphragm, ball, seat and body materials must be reviewed together against the liquid, solids, temperature and cleaning cycle.

Read technical guide →
TECHNICAL GUIDE · 13 AUG 2026

How to calculate total dynamic head before requesting a pump quotation

Calculate pump total dynamic head from static elevation, required terminal pressure and friction losses before requesting a quotation.

Read technical guide →
TECHNICAL GUIDE · 13 AUG 2026

QW submersible or ZW self-priming sewage pump: which installation fits?

Compare a QW submersible sewage pump with a ZW above-ground self-priming sewage pump by pit access, suction piping and maintenance layout.

Read technical guide →
TECHNICAL GUIDE · 13 AUG 2026

How to select a CDLF vertical multistage pump for pressure boosting

A buyer checklist for selecting a CDLF vertical multistage pump for clean-water pressure boosting without choosing by motor power alone.

Read technical guide →
TECHNICAL GUIDE · 12 AUG 2026

Why a ZW self-priming sewage pump does not prime

A practical troubleshooting flow for a ZW self-priming sewage pump that will not prime, loses prime or delivers insufficient flow.

Read technical guide →
TECHNICAL GUIDE · 12 AUG 2026

When does a metering pump need a back-pressure valve, relief valve or pulsation dampener?

Decide when a metering pump installation needs a back-pressure valve, relief valve, pulsation dampener, filter or calibration column.

Read technical guide →
TECHNICAL GUIDE · 12 AUG 2026

ISG vertical vs ISW horizontal inline pump: installation differences to check

Compare ISG vertical and ISW horizontal inline centrifugal pumps by footprint, service access, piping support and clean-liquid duty.

Read technical guide →
TECHNICAL GUIDE · 11 AUG 2026

Why a progressive cavity pump must not run dry and how to protect it

Learn why dry running damages a progressive cavity pump and how level, flow, temperature, torque and operating procedures protect the rotor-stator interface.

Read technical guide →

PROJECT SUPPORT

Have a duty point to review?

Send the medium, flow, head or pressure, temperature, viscosity, solids and installation conditions. We will help compare suitable pump families.

Send project details →